Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Ennis
Gate repair in Ennis usually runs $180 to $480 for hinge and post work, and $240 to $600 for opener and electronics calls. Most jobs we complete in a single visit. The Blackland Prairie clay under this town makes one thing certain: a gate that worked fine in March can drag on the caliche by June. If your gate is leaning, sagging, or faulting out, call (936) 226-3481 and a live person answers, day or night. We know Ennis gates because we work on them week in and week out, from the ranch roads off FM 85 to the shared driveways near Country Club Road.
Key Takeaways:
- Ennis’s black gumbo clay heaves gate posts out of plumb season after season, so post re-setting is a recurring local need, not a one-time fix.
- Most gate repairs in Ennis are completed in one visit with the price settled before we start.
- We service nine opener brands, including Ghost Controls, DoorKing, and Elite, and stand behind every job with a written 90-Day Done Right Promise.
- Call (936) 226-3481 for a free estimate or same-day emergency scheduling.
Why Ironworks Gate Co. Is Ennis’s Preferred Gate Repair Company
Ironworks Gate Co. has specialized exclusively in driveway and estate gate work for over 42 years. That is all we do. Generalist handymen see a gate problem once every few months; we see the same Blackland Prairie failure patterns on Ennis properties every single week, and that repetition has taught us what actually holds up here. We have re-bedded posts on Clay Street, re-aligned swing gates in the older ranch-style neighborhoods near downtown, and pulled stuck slide gates back onto their tracks in the acreage subdivisions on the city’s edges.
Victor Salinas leads a team of background-checked, uniformed technicians who follow our K.E.Y.S. values code: Krafted right, Every time, Your home first, Standing behind it. The 400th job gets the same care as the first. When you call (936) 226-3481, a person answers. Not a voicemail tree, not an answering service. And when we say we will be there, we will be there. That is the whole deal.
Every completed job is protected by our 90-Day Done Right Promise. Written, no paperwork, no arguing. If it is not right, we come back and make it right. That promise applies to every hinge we weld, every opener we program, and every post we set in Ennis soil.
Our Gate Repair Services in Ennis
We handle the full scope of gate repair, from the first hinge to the last bolt on the operator housing. In Ennis, the jobs that keep us busiest are the ones tied directly to the local ground: posts that have moved, hinges that no longer line up, welds that cracked when the clay dried out and the gate sagged. Here is what that looks like in practice.
Electric Gate Repair
When an electric gate in Ennis stops responding, the cause is often buried in the soil, not the electronics. A post that has moved even two inches can pull the wiring taut, loosen a limit switch, or trip the loop detector. We troubleshoot the full circuit, from the keypad to the motor, and most electric gate repairs in Ennis are completed the same day we arrive. If the board was killed by a lightning strike off a summer storm, we replace it and re-test the safety reverse settings before we leave.
Automatic Gate Repair
Automatic gates on rural properties around FM 85 and FM 879 fail differently than gates in town. Dust, heat, and 100°F-plus afternoons shorten the life of control boards and solar charge controllers. A slide operator that starts faulting every afternoon at 4 PM is usually binding on a rack and pinion that shifted when the post tilted. We re-align the rack, re-seat the operator, and adjust the torque settings rather than just clearing the fault code and hoping it goes away.
Hinge & Post Repair
This is the bread-and-butter Ennis gate repair, and it is the job we spend the most time on. The Blackland Prairie’s black gumbo swells in spring and shrinks in summer, and every swell-shrink cycle nudges gate posts a little farther out of plumb. A post that tilted 3 degrees last year will tilt 5 this year. We cut away the caliche around the footing, pour a deeper concrete collar below the shrink-swell zone, and re-set the post so it stays put. On shared driveways, we also re-set both posts together so the gate closes square against the latch post instead of binding on one side.
Gate Realignment
When a swing gate drags on the driveway or a slide gate shudders mid-travel, realignment is not guesswork. We check post plumb, hinge wear, bottom drag clearance, and the gate’s weight distribution before touching a single bolt. For Ennis properties, we look first at what the clay has done to the posts. If the post has moved, no amount of hinge adjustment will fix the drag. We correct the cause, not just the symptom, and we back the work with the 90-Day Done Right Promise.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Ennis
We are trained and equipped on nine gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That matters on an Ennis ranch road, because the operator bolted to your pipe gate could be any of them. Our technicians carry common control boards, remotes, and safety edges for Ghost Controls, DoorKing, and Elite units, along with the other brands we stock, so the correct fix usually happens on the first visit, not after a week of waiting on a part. Whatever is on your driveway, we service it and we stock the parts Ennis customers call about most.
Common Gate Repair Problems We See in Ennis Homes
- Posts heaved out of plumb. Black gumbo clay swells after spring rains and shrinks in summer droughts, pushing gate posts off vertical season after season. This is the root cause behind most sagging swing gates in Ennis, and re-setting the post with a deeper collar is the only lasting fix.
- Slide gates binding on the rack and pinion. On shared driveways and narrow side yards, a post that tilts even a few degrees forces the rack out of line and the operator starts faulting. We re-bed the post below the shrink-swell zone and re-align the rack so the gate runs smooth.
- Weld cracks at the hinge post. When the clay dries out in 100°F heat, the gate frame loses support, the weight shifts onto the hinge welds, and cracks spread fast. A sag correction without a new post footing will fail again within a season. We fix both, together, the first time.
- Safety sensor faults on shared driveways. Ennis is not full of wide estate entries. Tight lots on shared driveways mean photocells and loop detectors sit close to moving posts and heavy foot traffic. A sensor that keeps tripping is usually reacting to a gate that has shifted, not a sensor that has gone bad.
Pricing for Gate Repair in Ennis, TX
Here are the numbers we tell Ennis homeowners before we turn a wrench. Hinge and post repair typically runs $180 to $480, depending on how far the post has moved and whether we are re-pouring a concrete collar. Gate realignment usually falls between $160 and $340. Electric gate repair, from control board replacement to wiring repairs, runs $240 to $600. Weld and rust repair ranges from $120 for a small crack to $500 for structural reinforcement of a ranch gate. The price you are quoted is the price you will pay. We settle it before a single bolt is touched. Call (936) 226-3481 for a free estimate specific to your gate, and ask about the $50 Off Any Repair Over $250.
We Also Serve Cities Near Ennis
Our Gate Repair team covers Ennis and the surrounding towns. We regularly run calls to Waxahachie, Red Oak, Wilmer, and Lancaster, and we know the gate and soil conditions in each of them. If you are in Ennis or a neighboring community, call (936) 226-3481 and we will get you scheduled. Not every gate company sends crews this far south of the metro, but we do, every day. See more on our Gate Repair in Ennis coverage page.
Serving Ennis, TX - Our Local Coverage Area
We’re based in the Ennis area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Ennis
Your post is heaving because Ennis sits on Blackland Prairie clay that swells when saturated and shrinks when baked dry. The wet spring expands the soil around the footing and pushes the post off vertical; the summer drought then dries the clay, the post settles into its new tilted position, and the cycle repeats. Yes, it can be fixed permanently. We cut away the caliche around the old footing, pour a deeper concrete collar below the shrink-swell zone, and re-set the post so the heaving can no longer move it. Call (936) 226-3481 for an assessment and a written quote.
Usually yes, if the driveway is tight and a swing gate arcs over your neighbor’s access or a shared right of way. A slide gate keeps the entire opening usable and does not swing across anyone’s path. On narrow shared driveways, slide gates are often the better long-term fix. The trade-off is that a slide gate needs a post and track that can handle Ennis’s clay movement, which is where we see posts tilt 5 to 10 degrees toward the road after a wet spring. We size the footing for the soil, not just the gate, and can tell you whether a conversion makes sense for your property. Call (936) 226-3481 for a free measure and estimate.
Once a year, ideally in the spring after the rains have finished doing their worst to the ground. A seasonal tune-up runs $89 and includes checking the post plumb, opener torque, safety reverse, battery health, and the wiring. In Ennis, that spring check catches post movement before the summer heat bakes the clay solid and turns a small tilt into a jammed gate. Call (936) 226-3481 to book a seasonal tune-up.
A new hinge post footing and a re-weld at the hinge post. On ranch roads around FM 85 and FM 879, the common pattern is a heavy pipe gate whose posts have canted toward the road after a wet spring, cracking the welds and letting the gate sag into the caliche. Re-hanging the gate without addressing the footing will fail within a season. We re-bed the post below the shrink-swell zone, weld the cracks, and re-align the gate so it closes square. Call (936) 226-3481 for an estimate on your specific gate.
Yes, with the right equipment and placement. Ennis regularly sees 100°F-plus afternoons, and solar charge controllers and batteries degrade faster in that heat than in milder climates. We install solar openers on rural ranch gates with panels sized for the heat, controllers mounted out of direct afternoon sun, and battery enclosures that breathe. The failures we see are almost always an undersized panel or a controller baked against a metal post. We service and install solar-compatible units from Ghost Controls, DoorKing, Elite, and the other brands we stock. Call (936) 226-3481 and we will check what you have before recommending what you need.
Call Ironworks Gate Co. for Gate Repair in Ennis
If your gate is leaning, sagging, faulting, or making a noise it should not make, call us at (936) 226-3481. A live person answers, 24 hours a day, 7 days a week. We will give you a straight answer, an upfront price, and a written 90-Day Done Right Promise on the work. We have been doing this for over four decades, and we will be doing it in Ennis for another forty. Victor Salinas and the crew will be there when we say. (936) 226-3481.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Ennis and surrounding communities since 1984.