Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterTrusted Gate Parts & Welding for Waxahachie Homeowners
A sagging gate, a hinge that screams every time the wind blows, a weld that finally let go after twenty Texas summers. That’s where we come in. Ironworks Gate Co. has been providing Gate Parts & Welding in Waxahachie since 1984, and we handle everything from hinge replacement and post setting to custom fabrication on site. If your gate needs parts or a welder’s hand, call (936) 226-3481 and a live person will answer, any hour of the day or night.
Victor Salinas leads our team of background-checked, uniformed technicians, and every job we complete is backed by a written 90-Day Done Right Promise. No paperwork on your end. No arguing if something isn’t right. We just come back and make it right.
What Our Gate Parts & Welding Service Includes
Best Gate Parts & Welding in Waxahachie, TX covers a lot of ground. Here’s exactly what we do, and how to know when you need it.
Hinge Replacement
Hinges carry the entire weight of your gate, and when they wear out, the gate starts to drag, bind, or lean. We replace worn hinge pins, barrels, and complete hinge assemblies with heavy-duty components sized to your gate’s actual weight and swing. In Waxahachie’s clay soil, gate posts shift over time, which puts uneven load on hinges and shortens their life. We check the post alignment before we hang a new hinge, so the repair lasts instead of failing the same way a year later.
Post Replacement
A leaning post is almost never going to straighten itself, and pouring concrete around the base without fixing the root cause just hides the problem. We dig out the old post, inspect what caused the failure, and set a new post in concrete at the correct depth for Ellis County soil. If the old post failed because of rust at ground level, we order or fabricate a replacement that won’t repeat the same failure. This is one of the most common jobs we do for gates that were installed decades ago.
Rail Repair
Gate rails take hits from mowers, cars, and teenagers learning to drive. When a top or bottom rail bends or cracks, the whole gate frame loses its rigidity and the pickets start to rattle loose. We straighten rails where possible and weld or replace them when the metal is too far gone. On ornamental gates, we match the replacement rail profile so the repair doesn’t stand out like a patch.
Custom Welding
Some repairs can’t be fixed with a part off the shelf. When a gate frame tears at a stress point or a decorative scroll snaps, we weld it back with proper penetration and grind it clean. We carry mobile welding equipment on our trucks, so most custom welding happens right in your driveway without removing the gate. If you need a gate modified, widened, or reinforced, we can fabricate what the job calls for and paint it to match.
Gate Rollers
Sliding gates run on rollers, and when a roller seizes or flattens, the gate fights you every inch of the way. We replace worn rollers, adjust the track, and lubricate the moving parts so the gate rolls by hand instead of needing a shoulder. In Waxahachie, grass clippings and dirt work their way into roller bearings faster than most people expect. We check the track alignment while we’re at it, because a bad roller usually means the track has shifted too.
Latch & Lock
A gate that won’t latch is a gate that bangs in the wind, and a lock that won’t turn is a gate you can’t secure. We repair and replace gate latches, drop rods, cane bolts, and mechanical locks, including the lock bodies on automated gates. If your gate has an opener, we also check that the lock isn’t fighting the motor, which is a common cause of premature opener failure. A mechanical latch and an automated opener need to work together, not against each other.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Gate Parts & Welding
We work on gates from every major manufacturer, and we’ve spent years learning the quirks of each one. Ghost Controls openers, for example, are popular on residential swing gates in Waxahachie, and we keep their replacement parts on the truck. When a Ghost Controls arm or bracket fails, we don’t have to order the part and schedule a second visit. We fix it the same day, and we set the limits so the opener isn’t straining against the gate hardware.
DoorKing and Elite are common on the larger estate gates and commercial properties around Ellis County, and Mighty Mule shows up on a lot of farm and ranch entrances. We also do Gate Parts & Welding - Red Oak. We’ve repaired and welded the frames, hinges, and mounts on all of them, and we know which parts each brand tends to wear out first. Whether your gate has a Ghost Controls opener, a DoorKing, an Elite, a Mighty Mule, or no opener at all, the metalwork and the moving parts are still our specialty.
Signs You Need Gate Parts & Welding Right Now
- The gate scrapes or drags on the ground. That means a hinge, a roller, or a post has shifted out of position. Every time the gate scrapes, it’s wearing metal off the bottom rail and putting strain on every other component.
- You can see a crack in the metal. Gate frames crack at stress points, and a small crack becomes a structural failure quickly. If you can see daylight through a frame joint or a weld line, it’s time to call before the gate drops.
- The gate sags when it’s open. A gate that droops at the latch side has a failing hinge or a post that’s leaning. The longer it runs that way, the more damage it does to the latch, the frame, and the opener if you have one.
- The gate slams or bangs in the wind. A missing or broken latch, a worn drop rod, or a failed closer lets the gate swing free. In a Waxahachie spring storm, that’s how gates get torn off their hinges.
- The gate won’t stay open or closed. If the gate creeps back on its own, the hinges or the post aren’t level. That means the opener is working against gravity every cycle, which shortens the motor’s life and burns through parts faster.
None of these problems fix themselves. They get more expensive the longer they wait, and most of them are cheaper to repair now than they will be after the next hard wind.
Our Gate Parts & Welding Process - Step by Step
- 1
You call, a person answers. Call (936) 226-3481 any time, day or night. You’ll talk to a live person who can schedule your service call, not a voicemail tree.
- 2
We come out and diagnose. A uniformed, background-checked technician arrives in a fully stocked truck. We inspect the gate, the posts, the hinges, the rollers, and any opener, and we explain exactly what’s wrong in plain language.
- 3
You get an upfront price. Before we touch a single bolt, we give you a written price for the repair. You agree to it first. The number we quote is the number you pay, and nothing gets added on without your say-so.
- 4
We do the work, usually same visit. Most gate parts and welding jobs are finished the same day we start. We carry the common parts, the welding rig, and the tools to handle most failures on the first trip.
- 5
We stand behind it in writing. Every job is covered by our 90-Day Done Right Promise. If something we fixed isn’t right, call us and we come back. No forms, no runaround, no exceptions.
How Much Does Gate Parts & Welding Cost in Waxahachie?
A hinge replacement in Waxahachie typically runs $150 to $350 per hinge, depending on the gate’s weight and whether the post needs adjustment at the same time. Post replacement usually falls between $400 and $900, which includes digging, concrete, and re-hanging the gate. Rail repair and custom welding are quoted by the job, but most straightening or welding repairs land between $200 and $600. Gate roller replacement runs $120 to $300, and latch or lock repair is usually $100 to $250. These are honest ranges for Ellis County, not a bait number. The exact price depends on what we find when we look at the gate.
Several things move the price. Gate weight is the biggest one: a 16-foot ornamental steel gate puts more load on every part than an 8-foot aluminum one. Access matters too. If the gate post is set in a flower bed with irrigation lines running past it, the dig takes longer. And the condition of the surrounding hardware matters. A hinge replacement on a gate with a straight post is simple. A hinge replacement on a gate with a leaning post means fixing the post first.
The best way to avoid overpaying is to get a written estimate before the work starts, and to ask what’s included. Our estimates are free, and the price we quote is the price you pay. We also offer a free second opinion on any written estimate you’ve received from another company. Bring us the number, and we’ll tell you honestly whether it’s fair.
Gate Parts & Welding Near Waxahachie - Our Service Area
We’re based right here in Waxahachie and we work all over Ellis County and the southern Dallas suburbs. If you’re in Gate Parts & Welding in Ennis, Gate Parts & Welding in Midlothian, Oak Leaf, Red Oak, Ovilla, Glenn Heights, DeSoto, Lancaster, Cedar Hill, Wilmer, or Duncanville, we’ll be there fast. Most service calls in Waxahachie happen the same day you call. The rest of our service area is usually next-day at the latest. And if you’re browsing from the home page, this page is your direct line to the parts and welding crew.
Serving Waxahachie, TX - Our Local Coverage Area
We’re based in the Waxahachie area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Gate Parts & Welding in Waxahachie
Gate parts and welding covers the structural and mechanical repairs that keep a gate swinging or sliding the way it should. It includes hinges, posts, rails, rollers, latches, locks, and any custom metal fabrication a gate needs. At Ironworks Gate Co., it’s the work we do when a gate needs more than a new opener or a keypad, when the metal itself or the hardware carrying it has failed.
Most hinge, roller, latch, and rail repairs are finished in a single visit, usually within two to four hours on site. Post replacement takes longer because the concrete has to set, often half a day to a full day including the re-hang. Custom welding jobs vary, but we quote a time frame before we start and we stick to it. We will be there when we say.
Small repairs like a latch or a single roller start around $100 to $150. Hinge replacements run $150 to $350 per hinge, and post replacement usually falls between $400 and $900. Custom welding is priced by the job, typically $200 to $600 for most residential repairs. Call (936) 226-3481 for an exact quote, and remember that estimates are free and our price is agreed before any work starts.
Yes, we service and source parts for all four brands, and we’ve repaired the frames, hinges, and mounts on hundreds of gates running Ghost Controls, DoorKing, Elite, and Mighty Mule openers. If you have a different brand, we can help with that too. The metalwork and the moving hardware underneath the opener are our specialty regardless of the name on the motor.
In Waxahachie, most Emergency Gate Parts & Welding in Waxahachie, TX calls get same-day service. A gate that won’t close, a post that’s leaning, or a weld that’s cracked is a safety and security issue, and we treat it that way. Call (936) 226-3481 and a live person will get you on the schedule. Emergency repair work carries the same upfront pricing and the same 90-Day Done Right Promise as every other job we do.
Every job we complete is covered by our written 90-Day Done Right Promise. If something we repaired or welded isn’t right within 90 days, we come back and make it right. No paperwork for you, no arguing, no fine print. It’s the Keystone Standard on every gate job we’ve done since 1984.
Clear the area around the gate so we can work, and if the gate is automated, put the opener in manual release if you know how. Move any vehicles that block the gate’s swing path. If you have a specific concern, point it out when we arrive. Beyond that, leave the rest to us. We carry the tools, the parts, and the welding equipment to do the job right there in your driveway.
Schedule Your Gate Parts & Welding Service in Waxahachie Today
Text shifts, metal cracks, and hinges fail. It’s what gates in Texas do over time. Call (936) 226-3481 and we’ll get a technician out to look at your gate, give you an honest written quote, and fix it right the first time. We’ve been doing this work in Waxahachie since 1984, and we’ll be here for the next forty years to stand behind it.
Current offers: $50 off any repair over $250. Free second opinion on any written estimate. $89 seasonal tune-up. And a standing 5% discount for seniors and veterans, always.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Waxahachie since 1984.