Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGhost Controls Gate Access Control in Waxahachie: What to Know First
Ghost Controls gate access control repair in Waxahachie is work we do regularly, and most jobs are completed in a single visit with a written quote before we start. We are an independent Ghost Controls service provider - not affiliated with the manufacturer - which means we give you the straight answer on whether a part is worth repairing or replacing. If your Ghost Controls keypad, receiver, or opener is acting up, call (936) 226-3481 any hour and a live person picks up.
This page is for Waxahachie homeowners who own a Ghost Controls gate system and need the access side fixed: keypads, remotes, phone entry, card readers, video intercoms, or the control board tying it all together. If your gate has stopped responding, or works only sometimes, you’re in the right place.
How Ghost Controls Products Fail - and How We Fix Them
Ghost Controls builds dependable residential gate openers, but the access side has failure patterns we see repeatedly across Waxahachie driveways. Here is what actually goes wrong, by series, and what we do about it:
- AXP Series control board lockups after storms. The AXP1 and AXP2 boards are solid, but Ellis County lightning and power flickers can scramble the board’s logic so it ignores remotes even though the motor is fine. We reset and often add a surge suppressor to the low-voltage side - a $40 fix that prevents a $300 repeat.
- Ghost Controls keypad membrane wearing through at the 3, 5, and 7 positions. Those are the most common digits in local gate codes. Once moisture gets behind the silicone, the keypad ghosts entries or ignores the code entirely. We replace the keypad with an OEM Ghost Controls unit when available, and the wiring gets sealed against Waxahachie humidity.
- Range loss on the older TDS opener line. The TDS series receiver is sensitive to antenna positioning and corrosion at the antenna base. A gate that only opens from 15 feet away almost always has a corroded antenna connection. We replace the antenna and re-solder the joint, and range comes back to normal.
- Ghost Controls app module (model GCM2) losing WiFi after router changes. Homeowners upgrade their internet or move the router, and suddenly the app that opens the gate stops working. This is a pairing issue, not a dead module. We re-pair and reconfigure, and it is usually a 30-minute fix.
- Photo-eye misalignment triggering constant auto-reverse. On any Ghost Controls opener wired to safety eyes, a shifted bracket or a warped post throws the beam off by a fraction of an inch, so the gate starts to close and then reverses. It looks like a motor problem. It is not. We realign and anchor the eyes properly, and the false reversals stop.
Our Ghost Controls Gate Access Control Process
Here is how a Ghost Controls access control job goes at your Waxahachie home, from first call to final test:
- 1
You call (936) 226-3481. A live person answers. We ask what the gate is doing, or not doing, and schedule a time we will actually keep.
- 2
We diagnose on site. A background-checked, uniformed technician traces the fault through the access components - keypad, receiver, loop detector, board - and explains what failed in plain language before any work is approved.
- 3
You get a written price. Not a range, not a guess. The number you approve is the number on the invoice. No surprises, ever.
- 4
We repair using OEM Ghost Controls parts when the job calls for it. For non-safety items where an OEM part is backordered, we offer a quality aftermarket option and tell you the trade-off before ordering either one.
- 5
We test everything twice. The gate cycles, the remote works from the street, the keypad responds, the safety edges stop the gate on contact. We do not leave until it is right.
- 6
You get the 90-Day Done Right Promise in writing. If something is not right, we come back and make it right. No paperwork, no arguing.
What Ghost Controls Gate Access Control Costs in Waxahachie
Here is what we charge for common Ghost Controls access control work in Waxahachie. These are real numbers for the jobs we do most:
| Job | Typical Cost |
|---|---|
| Keypad replacement (Ghost Controls OEM) | $180 - $290 installed |
| Receiver or antenna repair | $140 - $240 |
| Control board replacement (AXP series) | $310 - $460 installed |
| Remote programming (up to three remotes) | $85 - $140 |
| Photo-eye repair or realignment | $110 - $180 |
| App module (GCM2) re-pair and setup | $95 - $150 |
| Full access control system replacement | $700 - $1,400 depending on components |
What moves the price is whether we’re replacing a single part or rebuilding the entire access chain, and whether your Ghost Controls model is still under warranty. We quote before we turn a single bolt, and the price does not change. Call (936) 226-3481 for a free estimate on your specific setup.
Why Waxahachie Homeowners Call Ironworks Gate Co. for Ghost Controls Work
Waxahachie homeowners have been calling us for gate work for over 42 years, and a good number of those calls are for Ghost Controls systems. Our technicians know this brand the way a mechanic knows a certain engine - the weak points, the common mistakes, the fixes that last. We arrive when we say we will, the price is settled before we start, and every job is backed by the 90-Day Done Right Promise in writing.
If your Ghost Controls system is beyond sensible repair, we are trained and equipped on eight other gate automation brands - LiftMaster, Mighty Mule, DoorKing, and the rest - so the recommendation we make is the right one for your property, not limited by what we happen to sell. Victor Salinas grew up a few miles from the Ellis County Courthouse square, studied electronics at Navarro College in Corsicana, and has been doing this work around Ellis County long enough that his reputation rides on every gate he leaves behind. If it rolls, swings, or slides, we can tell you what is wrong with it - and whether it is worth fixing.
FAQs
No. As an independent Ghost Controls service provider, we use OEM parts when the job requires them and follow manufacturer wiring and configuration standards, so your warranty stays intact. If a component is still covered, we will tell you and help you pursue the warranty before any paid repair is considered.
In most cases we can have a technician at your Waxahachie property the same day you call, especially when the gate will not open at all. Call (936) 226-3481 and a live person will give you a straight answer on scheduling.
Yes. The current Ghost Controls keypads are compatible across the AXP and TDS lines, and we program the new keypad to your existing receiver on the same visit. No new receiver required in most cases.
Repair is almost always cheaper in the short term, and for Ghost Controls systems under ten years old, a board or keypad replacement typically buys another five to seven years of service. We will tell you honestly if your system has reached the point where replacement makes more sense, and what a comparable new system would cost installed.
Yes. We service nine brands in total, including LiftMaster, Mighty Mule, and DoorKing, so if you have a second gate or a neighbor with a different opener, the same technician can handle it.
Get Your Ghost Controls Gate Access Fixed in Waxahachie
If your Ghost Controls gate access is acting up in Waxahachie, call Ironworks Gate Co. at (936) 226-3481. A live person answers day or night. We will give you a straight diagnosis, a written price before any work starts, and a 90-Day Done Right Promise on the finished job. $50 off any repair over $250, free second opinions on written estimates, and a standing 5% discount for seniors and veterans.
Written by Victor Salinas, Owner, Ironworks Gate Co. at Ironworks Gate Co., serving Waxahachie and nearby areas.