A Ironworks company - serving Waxahachie, TX

Ghost Controls Gate Motor & Opener Nationwide

Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Styles & brands we work with

Wrought iron
Wrought iron
Wood & steel frame
Wood & steel frame
Farm & ranch
Farm & ranch
Sliding driveway gates
Sliding driveway gates
LiftMaster operators
LiftMaster operators

Before & after – our own jobs

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Ghost Controls Gate Motor & Opener in Waxahachie: What to Know First

Ghost Controls gate motor and opener repair in Waxahachie typically runs $185 to $460 for most residential failures, and our techs complete the large majority of Ghost Controls jobs in a single visit. We are an independent Ghost Controls service provider, not an authorized dealer, which means we fix what is actually wrong rather than pushing a full system replacement. If you own a Ghost Controls opener and the gate has stopped responding, call (936) 226-3481 and a live person will answer, day or night.

Technician performing automatic gate motor and opener maintenance nationwide

Call (936) 226-3481

This page is written for Waxahachie homeowners who have a Ghost Controls system on their driveway and want straight answers about what failed, what it costs, and whether it is worth repairing. Victor Salinas grew up a few miles from the Ellis County Courthouse square, and he has spent over two decades keeping Ellis County gates closing the way they should. If it rolls, swings, or slides, we can tell you what is wrong with it – and whether it is worth fixing.

What a Ghost Controls Gate Motor & Opener Costs in Waxahachie

Most Ghost Controls repair work in Waxahachie falls between $185 and $460, depending on which component failed and whether we are replacing a part or rebuilding a connection. Here are the numbers we quote most often:

  • Control board replacement (AXDP, AXD, or TSS1 series): $240 to $410 installed, depending on the board revision and whether it needs a new receiver paired.
  • Arm actuator replacement (single swing arm, common on Ghost Controls swing kits): $220 to $385 installed, including limit setup and force adjustment.
  • Limit switch and travel module repair: $135 to $260, which covers diagnosis, part, and recalibration.
  • Remote receiver and transmitter reprogramming or replacement: $75 to $180, including pairing all existing remotes and keypads.
  • Full opener swap with a new Ghost Controls kit: $1,100 to $1,900 installed, depending on gate length, weight, and whether battery backup is included.

What moves the price is parts availability and access. Ghost Controls parts are generally obtainable, but some older boards have been superseded, which means the replacement part costs more than the original did. We quote the full price before any work begins, and that number does not change unless you approve something new in writing. The price is settled before a single bolt is turned. Call (936) 226-3481 for a free estimate on your specific Ghost Controls opener.

How Ghost Controls Products Fail – and How We Fix Them

Ghost Controls builds a straightforward, homeowner-friendly opener, and their systems hold up reasonably well in the Texas climate. But every brand has its patterns, and we see the same failures repeat across Waxahachie driveways.

  • AXDP control board capacitor failure after a storm. The AXDP board is the brain of most Ghost Controls swing systems, and its power-supply capacitors are the first thing to let go when a lightning strike or power surge rolls through Ellis County. The symptom looks random: the gate opens fine, then refuses to close, or the remote stops responding while the manual button still works. The fix is a board rebuild or replacement, not a new motor, and we test the board on the bench before we order parts.
  • TSS1 torque limiter slipping on heavier gates. The TSS1 series has an adjustable torque limiter that protects the motor from burning out. On gates near the top of the weight rating, or on gates that have sagging hinge posts, that limiter starts slipping more often, and the gate stops mid-travel or opens halfway and quits. We see this a lot on older Waxahachie properties where the gate has been hung for fifteen or twenty years. The proper fix is adjusting the limiter and addressing the hinge sag, not just cranking the torque to maximum.
  • AXD series arm actuator stripped gears in cold snaps. The AXD uses a screw-drive arm, and the nylon gear inside is deliberately sacrificial so the motor does not destroy itself. When a north Texas cold front drops the temperature and the gate hinges stiffen, that gear can strip. The gate will hum or click but not move. We replace the gear and re-lubricate the arm, and if we find the hinges are binding, we address that on the same visit so it does not happen again next winter.
  • Battery backup draining during long power outages. Ghost Controls sells a battery backup kit, and it works well when the battery is healthy. The problem in Waxahachie is the heat: batteries in a metal enclosure on a south-facing gate reach 120 degrees in July, which shortens their life to two or three years. Homeowners often do not know the battery has died until the power goes out and the gate will not open at all.
  • Remote receiver losing pairing after a board power cycle. We get calls where a homeowner replaced a battery in the remote or unplugged the opener, and now nothing responds. That is typically a receiver pairing issue on the Ghost Controls board, not a failed remote. It takes us about twenty minutes to re-pair everything, and we test every remote and keypad before we leave.

Our Ghost Controls Gate Motor & Opener Process

  1. 1
    You call. A live person answers at (936) 226-3481, 24 hours a day, 7 days a week. We ask what the gate is doing, when it started, and what model Ghost Controls opener you have.
  2. 2
    We diagnose on site. A background-checked, uniformed technician arrives when we say he will. He bench-tests the board, checks the arm, the limit switches, the torque limiter, and the wiring before recommending anything.
  3. 3
    We show you exactly what failed and what it costs. You get a written price before any work begins. If the part is not worth replacing, we tell you that plainly and quote a new opener instead.
  4. 4
    We repair with the right parts. We use OEM Ghost Controls parts when they are available and make sense. On older systems where the OEM part has been discontinued or is priced unreasonably, we will recommend a quality aftermarket equivalent and tell you the difference before using it.
  5. 5
    We test everything. We open and close the gate fifteen to twenty times, test every remote and keypad, run the battery backup if one is installed, and verify the auto-close and obstruction detection.
  6. 6
    We write it down. Every job gets the 90-Day Done Right Promise in writing. If it is not right, we come back and make it right. No arguing, no paperwork, no exceptions.

Why Waxahachie Homeowners Call Ironworks Gate Co. for Ghost Controls Work

We have been serving Ellis County since 1984, and we plan to be in town for another forty years. That means we answer the phone and we stand behind what we install. The 90-Day Done Right Promise is a written guarantee on every Ghost Controls repair, and we do not make you chase us to honor it.

Most Ghost Controls jobs are done in a single visit, because our techs are trained on nine gate-automation brands including LiftMaster, Mighty Mule, and DoorKing. That matters when a Ghost Controls unit shares a driveway with another brand’s opener, or when a homeowner inherited a mixed system. We can fix the whole gate, not just the motor.

And we do not upsell what does not need replacing. A square deal: upfront price, no surprises on the bill. Senior and veteran homeowners in Waxahachie always receive 5% off, and we offer $50 off any repair over $250.

Frequently Asked Questions About Ghost Controls Gate Motors in Waxahachie

Get Your Ghost Controls Gate Working Again

If your Ghost Controls opener is acting up, call (936) 226-3481. A live person answers, day or night, and we will tell you straight whether it is worth repairing. Free estimates, upfront pricing, and a written guarantee on every job. Done right, and backed in writing.

Written by Victor Salinas, Owner, Ironworks Gate Co. at Ironworks Gate Co., serving Waxahachie and nearby areas.

Need Gate Repair help in Waxahachie? Licensed & insured · 30-60 min response · free estimates
Call (936) 226-3481
Local Service Coverage

Request a Free Estimate in Waxahachie

Tell us what you need - Ironworks Gate Co. responds fast. No obligation.

By requesting your free estimate, you agree to the terms of our Privacy Policy and agree that you may be contacted by call, text, or email regarding your service needs, including from the affiliated professionals who may take on the job.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch