Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Gate Access Control Across Midlothian
Gate access control in Midlothian has to solve two problems most metro installers never think about: long runs from the house to the gate, and soil that will not hold a post still. We run keypads, phone-entry systems, card readers, and video intercoms on acreage entrances all over town, and we do it so the system works the first time and keeps working when the Blackland clay decides to move. Whether you’re on a 10-acre place off FM 663 or a new-construction acreage subdivision on the east side, we’ll get you a system sized for the distance and the dirt. Call (936) 226-3481 and tell us what you’ve got at the entrance; we’ll tell you straight what it will take.

Why Ironworks Gate Co. Is Midlothian’s Preferred Gate Access Control Company
We have been repairing and installing driveway gates for over 42 years, founded back in 1984, and we plan on being in town for another forty. Midlothian homeowners call us because we have seen what the local soil does to a gate system, and we fix the root cause instead of slapping a new keypad on a post that is still moving. Our background-checked, uniformed technicians work by a simple code: Krafted right, Every time, Your home first, Standing behind it. That means the 400th job gets the same care as the first.
When you call Ironworks Gate Co., a live person answers. Twenty-four hours a day, seven days a week. No voicemail trees, no callback queues, no waiting until Monday morning. If your gate is stuck open at 9 pm with a delivery coming, you talk to a human who can dispatch a crew to Midlothian that night. And every job we finish, including access control work, is protected by our 90-Day Done Right Promise in writing. If it is not right, we come back and make it right. No paperwork, no arguing.
Midlothian’s gate access control work has a local character you won’t find in Mansfield or Waxahachie. The clay here moves. The cement dust from the local plants settles on everything. We know both of those things because we work in them every week. That local knowledge is the difference between a keypad that lasts eight years and one that fails in two.
Our Gate Access Control Services in Midlothian
Keypad Entry
Keypad entry is the workhorse for Midlothian acreage gates. We install wired and wireless keypads that stand up to direct sun, cement dust, and the occasional ice storm, and we program multiple codes so you can give the pool guy one code and your daughter another. On long driveways where running conduit from the house is impractical, we size a standalone keypad with its own solar feed and battery bank. Figure $450 to $1,400 for a quality keypad installed on a Midlothian gate, depending on whether you need wireless, a pedestal, or integration with an existing opener.

Remote Control
Remote control systems for Midlothian properties usually need more range than a standard transmitter delivers. A gate 400 feet from the house on a 5-acre tract off Walnut Grove Road needs a high-gain receiver and sometimes a remote antenna mounted up high, not the little antenna that came in the box. We can add multi-button remotes for the whole family, homelink programming for the truck, and keychain transmitters for the kids. A typical remote receiver upgrade runs $250 to $600, and we stock parts locally so we are not waiting on a shipment when yours quits.

Phone Entry
Phone entry lets you buzz open the gate from your cell phone, which matters in Midlothian because half the service people who come to your house are from out of town and will never have a keypad code or a remote. The system calls your phone when someone presses the call button at the gate; you press a key and the gate opens. We install cellular-based phone entry systems that work without a landline, which is important on acreage properties where the house phone line never reached the gate. Installed pricing for phone entry runs $800 to $1,800 on a typical Midlothian driveway.

Card Reader
Card readers make sense for Midlothian homeowners with staff, contractors, or a multi-generational family coming and going. You issue a card or fob to each person, and you can delete a card in seconds when a contractor relationship ends. We install proximity card readers that read from a few inches away and work through a gate pedestal. On a standard ornamental iron gate, a single-door card reader with controller and power supply runs $700 to $1,500 installed, and we can program the cards on site before we leave.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Midlothian
We are trained and equipped on nine gate-automation brands, and that matters because you shouldn’t have to replace a perfectly good opener just because the last company only knew one brand. Around Midlothian we work on DoorKing systems on older ranch gates, Elite operators on newer slide gates, and Mighty Mule and Ghost Controls units on smaller acreage entrances. We stock common parts and remotes for these brands locally, so a failed receiver or a dead remote doesn’t turn into a two-week wait. Whatever is on your gate, we will diagnose it and fix it on the first visit in most cases.
Common Gate Access Control Problems We See in Midlothian Homes
- Post heave throwing the keypad or reader out of alignment. Blackland clay swells in wet seasons and the post holding your keypad or card reader tilts. The electronics still work, but the strike plate no longer lines up, or the reader can’t see the card. You fix the post, then the electronics.
- Cement dust degrading keypad contacts and RF range. The Martin Marietta and CRH/Ash Grove plants put a fine dust in the air that settles on everything. Keypad membrane contacts get gritty, and remote receiver antennas lose range. We clean and seal these components as part of any service call.
- Freeze-thaw cracking post footings and letting moisture in. A hard freeze followed by a thaw cracks the concrete around a post. Water gets in, rust starts at the hinge post weldment, and eventually the post itself fails. We see this constantly on older ranch properties that predate the subdivision boom.
- Long driveway wiring losing voltage. On Midlothian acreage, the gate can be 300 to 800 feet from the panel. Low-voltage wiring loses voltage over that distance, and a keypad or card reader at the gate gets flaky. We spec heavier gauge wire, add a local transformer, or go solar to solve it.
Pricing for Gate Access Control in Midlothian, TX
Here are honest numbers for Midlothian’s market. A keypad entry system with installation runs $450 to $1,400. A remote control receiver upgrade is $250 to $600. A phone entry system with cellular connectivity runs $800 to $1,800. A card reader with controller runs $700 to $1,500. A video intercom system at the gate starts around $900 and runs to $2,500 with a monitor in the house. If you’re adding access control to a gate that has no power at the entrance, a solar panel, battery, and charge controller adds $400 to $900 depending on panel size.

Every price is quoted and agreed in writing before any work starts. You will know the number before we turn a single bolt. Estimates are free. We also run standing offers for Midlothian customers: $50 off any repair over $250, a free second opinion on any written estimate, and an $89 seasonal tune-up. Seniors and veterans always get 5% off.
Call (936) 226-3481 for an exact quote on your gate.
We Also Serve Cities Near Midlothian
If you’re outside the Midlothian city limits, we also serve Cedar Hill, Mansfield, Waxahachie, and Red Oak. The soil and the climate change a bit as you move west toward sandy ground, so the problems shift. We see more rust and fewer post failures in some of those areas. Wherever you are in the area, our Gate Access Control team can help. We coordinate scheduling from our Dallas-Fort Worth office and dispatch local crews to Midlothian and the surrounding cities.
Serving Midlothian, TX - Our Local Coverage Area
We’re based in the Midlothian area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Midlothian
Heavy rain saturates the Blackland clay and the post holding your keypad shifts, sometimes as much as a few inches. The keypad still works internally, but the wiring connection at the base gets stretched or the post tilts enough that the sun shield misses and water gets into the keypad housing. We fix this by resetting the post in a deeper footing with gravel drainage and resealing the keypad, not by replacing the keypad. Call (936) 226-3481 and we’ll diagnose it before you spend money on a new unit.
Yes, and most of the time it’s the cheaper option compared to trenching 600 feet of conduit. You need a solar panel sized for the opener’s draw plus whatever access control you add on top: keypad, card reader, or phone entry. We size the panel to the actual usage, not a one-size-fits-all kit. The gate cycles fine year-round as long as the panel is angled right and the battery bank is sized for Midlothian’s overcast winter weeks. Figure $400 to $900 in solar equipment added to a typical access control install.
Cement dust settles on the camera lens and the card reader face, and it is abrasive. A video intercom camera gets hazy and loses image clarity within a few months. A card reader’s proximity sensor gets a film that degrades read range. We clean and seal these components as a standard part of any Midlothian service call, and we can add a weather hood or move the reader to a protected spot if the dust is heavy. Call (936) 226-3481 if your video intercom has gone fuzzy this season.
The motor is probably fine. The post has moved. Blackland clay swells in wet weather and the concrete-encased post tilts two to three degrees in a single wet season, binding the gate frame or the slide track. The operator’s entrapment protection senses the resistance and shuts down mid-cycle. We reset the post, realign the gate, and reprogram the operator. You don’t need a new motor. Do not attempt to adjust the travel limits to force the gate to close; that defeats the safety system and can damage the operator or hurt someone.
Yes. Any automated gate, including a solar-powered farm gate on a ranch entrance, is required to have UL 325 compliant entrapment protection. That means photo eyes, a reversing edge or contact sensor, and adjustable force settings that stop and reverse the gate if it hits an obstruction. Solar power does not change the requirement. If your current gate does not have working entrapment protection, call (936) 226-3481 and we will get it compliant before someone gets hurt.
Out on a 3-acre tract off FM 663 near the Martin Marietta plant, our crew found a LiftMaster slide gate operator repeatedly tripping its safety photocell. The concrete post footing had heaved off-plumb from spring rain, twisting the rack and pinion track just enough to bind. We reset the hinge post in a deeper footing with a gravel bell bottom, realigned the rack, and reprogrammed the loop detector. The gate has cycled clean for two seasons since.
If your Midlothian gate access control is acting up, call (936) 226-3481. We will quote the job upfront in writing, fix the actual problem, and stand behind the work with our 90-Day Done Right Promise. Free estimates, always.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Midlothian and the surrounding communities for over 42 years.





Before
After
Before
After
Before
After