Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Alvarado
Gate parts and welding in Alvarado means dealing with two kinds of gates: heavy welded pipe gates on the county roads and ornamental or automated driveway gates on newer acreage lots. Most parts failures we see here come down to three things: hinge plates cracking under a sagging post, latches missing after the clay shifts, and operator control boards dying on gates hung twenty-plus years ago. If your gate drags, hangs crooked, or won’t catch the latch, call us at (936) 226-3481. We weld. We replace posts. We rebuild rails. And we’ll tell you straight whether a part is worth saving or cheaper to replace.
We’re Gate Parts & Welding specialists carrying the parts and the welding rig to fix most Alvarado gates in one visit. Our crews know the difference between a schedule-40 pipe bollard driven into clay and a proper concrete-footed post, because on this side of Johnson County that difference is the entire story.
Why Ironworks Gate Co. Is Alvarado’s Preferred Gate Parts & Welding Company
Alvarado sits at the working edge between DFW suburban sprawl and active ranch land in Johnson County. Gate repair here has to serve both ornamental residential driveway gates on newer acreage developments and heavy-duty welded pipe and livestock panel gates on working rural properties. That’s a dual market you won’t find in purely suburban communities to the north like Burleson or Mansfield, and it’s the work we’ve been doing for over 42 years.
Our founder, Victor Salinas, built Ironworks Gate Co. around a simple rule: do the job the way you’d do it on your own mother’s property. That means background-checked, uniformed technicians, a price settled before any work starts, and a written 90-Day Done Right Promise on every completed job. If it’s not right, we come back and make it right. No paperwork, no arguing.
We coordinate dispatch and scheduling from our Dallas-Fort Worth office, with crews running calls across Alvarado and the surrounding Johnson County roads. A live person answers the phone 24 hours a day, 7 days a week. Not a voicemail tree. Not an answering service. When your gate is down and the cattle are looking at the county road, you get a person.
Alvarado customers can take advantage of the same standing offers we run everywhere we work: $50 off any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and a permanent 5% senior and veteran discount.
Our Gate Parts & Welding Services in Alvarado
Post Replacement
On the county roads east and west of Alvarado, welded pipe gates are often set on schedule-40 pipe bollards driven directly into clay with no concrete footing. That shortcut lets Blackland Prairie soil movement walk the posts out of plumb within a few seasons. You get a gate that drops at the latch side, scrapes the grade, and won’t hold a weld on the hinge plates because the post keeps flexing. We pull the old bollard, excavate a proper hole, set a new post in concrete, and weld fresh hinge plates square to the gate leaf. The post stays put this time.
Post replacement in Alvarado typically runs $350 to $900 depending on post size, whether we’re setting in concrete, and how much of the old footing has to come out. The bigger number is always worth it: a post that’s moving will crack every hinge weld you pay for, every time.
Hinge Replacement
Hinge plates on Alvarado gates carry more weight than they were ever designed for once a post heaves a few degrees. The gate leaf becomes a lever, and the weld is the weak point. We cut out the old hinge, grind the post clean, and weld in a heavier plate that matches the gate’s swing. On older welded pipe gates we often upgrade from light farm-store hinges to greasable barrel hinges that survive Johnson County’s dust and clay.
Hinge replacement on a residential gate in Alvarado generally runs $180 to $450 per hinge, depending on whether the post is still sound and whether the gate needs lifting and re-squaring while we’re in there.
Rail Repair
Pipe gate rails crack where they shouldn’t: right beside the hinge, where the stress concentrates, or where a vehicle clipped the gate ten years ago and nobody noticed until the rust finally ate through. We weld the crack, fishplate the joint if the section is too far gone for a clean repair, and repaint the repaired section to slow the rust. On older gates with multiple failing rail joints, we’ll tell you if a full re-weld of the frame makes more sense than chasing cracks one at a time.
Rail repair in Alvarado typically runs $150 to $500 depending on how many joints need work and how much prep grinding is required before the weld takes.
Custom Welding
Sometimes the right part doesn’t exist because the gate was built on the property forty years ago by a welder who’s long gone. We fabricate replacement hinges, latch plates, drop rods, gate stops, and extension brackets on-site or in the shop when the job calls for it. We’ve built custom catch plates for pipe gates whose latch side sags, welded in receiver tubes for automated openers, and fabricated brackets to adapt modern operators to older gate frames.
Custom welding in Alvarado starts around $150 for small brackets and plates and runs up from there for larger fabrications. The price is quoted and agreed before the first bead is laid, so there’s no surprise on the bill.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Alvarado
We’re certified to service nine gate-automation brands, and on Alvarado jobs we most often work on Ghost Controls, Linear, and older Viking units hanging on 1980s-to-2000s swing gates. That certification matters when the control board on a legacy operator finally quits and the question is whether to source a replacement board or retire the unit. We carry common parts for the brands we service and can source what we don’t stock, usually inside a day. For Alvarado customers that means no two-week wait on a gate that won’t close.
Common Gate Parts & Welding Problems We See in Alvarado Homes
- Post heave from expansive clay. Johnson County sits on Blackland Prairie clay that swells in wet winters and shrinks in drought summers. When a post set without a concrete footing moves, the hinge plates torque, the gate leaf drops, and the latch misses the receiver. The fix is a new footing and re-welded hinges, not another shim.
- Worn hinge barrels on pipe gates. The county roads east and west of Alvarado are dusty and dry most of the year. Unsealed hinge barrels wear oval, the gate starts to grind, and eventually the leaf sags far enough that the latch won’t engage no matter how many times you adjust it.
- Obsolete operator control boards. Gates hung in the 1990s and early 2000s with LiftMaster or FAAC operators are now hitting the end of their board life. Symptoms are the same: the remote stops working, the gate opens but won’t close, or the unit clicks and does nothing. Sometimes a board replacement makes sense. Sometimes the operator has to be retired.
- Broken or missing gate rollers. Slide gates are common along the newer construction on the I-35W corridor. When a roller bearing goes flat or the track shifts as the surrounding clay settles, the gate grinds and the motor burns out faster. We replace rollers and re-set the track before the operator pays for the neglect.
Pricing for Gate Parts & Welding in Alvarado, TX
What you’ll pay in Alvarado depends mostly on what’s been done to the gate before you called us. A simple hinge replacement on a sound post runs $180 to $450 per hinge. Post replacement with a proper concrete footing runs $350 to $900. Rail repair runs $150 to $500. Custom welding starts around $150 and goes up with the size of the fabrication. Full gate re-builds, where we cut the frame apart, re-square it, weld everything back, and re-set the posts, generally run $800 to $1,800 depending on the gate’s size and how much material needs replacing.
Every price is quoted and agreed before any work starts. Estimates are free. Call (936) 226-3481 and we’ll give you a number you can plan around, not a range that balloons after the first cut.
We Also Serve Cities Near Alvarado
Beyond Alvarado, our crews cover Gate Parts & Welding in Alvarado as well as Mansfield, Midlothian, Cedar Hill, and Grand Prairie. If you’re on the edge of town or just over a county line, call and we’ll tell you when we can be there.
Serving Alvarado, TX - Our Local Coverage Area
We’re based in the Alvarado area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Alvarado
Because the post was likely set in expansive Blackland Prairie clay without a concrete footing. The soil swells in wet winters and shrinks in dry summers, and each cycle walks the post a little further out of alignment. It can look plumb after a fresh adjustment and be leaning again before next season. The only durable fix is pulling the post, digging a proper hole, and setting a new post in concrete. Call (936) 226-3481 for a free estimate on a post reset that stays put.
Usually yes, with a combination of post re-setting, hinge replacement, and re-welding the frame. Two inches of sag means something structural has moved, and welding the gate leaf alone won’t fix the root cause. We identify whether the post, the hinges, or the frame itself is the failure point and fix all three if needed.
It depends on the operator’s age and what’s failed. Control boards and limit switches can be replaced on units that still have good motors and gearboxes. On units over twenty years old with multiple failing components, replacement is usually the cheaper answer over the next few years. We’ll show you the numbers for both paths before you spend a dollar.
Yes. We can often extract the old bollard, core out the existing hole to the right depth, and set a new post in concrete without disturbing the surrounding driveway more than a foot or two. If the gate is near the drive surface we’ll cut and patch clean. The work is done by hand and by machine, carefully, with the price agreed before we dig anything.
The gate usually defaults to fail-safe or fail-secure behavior, meaning it either refuses to close or closes without obstruction detection. Both are dangerous, especially around livestock and kids. We replace the photocell and re-check the operator’s reversing sensitivity, so the gate stops and reverses when it should. Safety hardware is never something to bypass on a rural gate.
Contact Ironworks Gate Co. for Gate Parts & Welding in Alvarado
If your gate is dragging, sagging, or won’t stay latched, call us at (936) 226-3481. We’ll answer in person, schedule a time that works for you, and show up when we say. The estimate is free. The price is settled before we start. And the work is backed by our written 90-Day Done Right Promise. Done right, and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Alvarado and the surrounding Johnson County communities.